Into the antenna with a tracking generator and put a spectrum analyzer on TP2. Kenwood Programing Software FIRMWARE: KDS-100 504XXXXX 4A46 PTT ID Display feature 176.86 KB CURRENT 401XXXXX F7FC Corrects lock up whe. Kenwood programming software - Reference Chart. Turn the L203 and L207 slugs fully clockwise. IC-3FX 245MHZ THAILAND CB HANDY RADIO, EX2020 REV 1.0. These settings control the varactor diodes in the front end preselector. Use KPG49D programming software and set "Sensitivity" to 60 (low), 135 (medium), 200 (high) Middle hole TC106 go 1/4 turn cw (brings rx down to 440mhz) TX should unlock PLL (radio beeps after mic keyed for about 2 seconds).īottom hole TC109 (towards front of radio) go 1/4 turn ccw (brings tx down to 440mhz) So, I guess my main question is, can this radio (TK-880 version 1.50) take the amateur radio frequencies of 442 and 443mhz?Īny help or suggestions, or redirection to another group would be greatly appreciated. The software takes the 442, 443 frequencies but when I program to the radio, the receive frequency does not work but the transmit works since it is above 444mhz. I'm using the KPG49D version 3.02 software on a version 1.50 radio.
But I was told this radio would program out of band. The frequencies I need are in the 442 and 443mhz range. It seems that the TK-880 will not received on the frequencies below 444mhz. I had no problem programing the TK-780, but I'm having trouble with the TK-880. I was told both radios would work on those bands. I bought a Kenwood TK-780 and 880 (versions 1.50) for use on the amateur radios bands. Ive been all over the place with no real answers. The radio will ask once again for old password before to be disabled.I hope I can get some information on this issue. Clear all password fields and try to "write" the radio. How to find password: my TK2160 old password example.Īfter that it is possible to disable the password. Useful when radio is protected by read/write password. License key provided for "engineering level". Tested with Windows 7 and USB/TTL interface. KPG-82D v2.11 for TK2160 and next Radios. KPG-56D v4.22 for TK260G/270G and next Radios Mobileor Portable (UHF versions are also supported). Working only with MAX232 and native COM port. Maybe DOSBOX can help to decrease CPU speed. Using Win XP and Pentium 1.8GHz, i didn't succeed to read 100%. Note: this is DOS software and for best result is necessary MS-DOS environment. KPG-27D v5.0 for TK260/270 (without G) and next Radios. Check "serial key.txt" file located inside of ZIP file. The software is provided with license key. Tested using CH340 USB/RS232 adapter or native COM port (madantory for DOS version). MAX232 serial interface for Kenwood - possible to be used with MS-DOS and Windows programming software. Universal USB interface for Kenwood - only for Windows programming software. Below information are tested by me, everything is free for download.
0 kommentar(er)
